In SOLIDWORKS 2019,You can create partial chamfers and fillets with specified lengths along model edges.
The Manual tab of the Fillet PropertyManager and the Chamfer PropertyManager contains a group box where you can specify Partial Edge Parameter. When you select an edge in Items To Fillet or Items To Chamfer , expand Partial Edge Parameters to define the start and end position of the partial feature.
This enhancement is available only for constant size fillets and offset face chamfers.
- To create partial chamfers:
- Open system_dir:\Users\Public\Public Documents\SOLIDWORKS\SOLIDWORKS 2019\samples\whatsnew\parts\chamfer.sldprt.
- Click Chamfer (Features toolbar) or .
- Right-click the edge shown and click Select Tangency.
- In the PropertyManager:
- Under Chamfer Type, click Offset Face .
- Select Full preview.
- Select Partial Edge Parameters.
- In Start condition, select Distance offset.
- Set Offset distance from start point to 20mm.
- In End condition, select Distance offset.
- Drag the handles approximately as shown.
- Click .