For example, the EN 10025-2 and 10025-3 standards define the guaranteed Yield Strength<\/strong> as a function of the nominal thickness of the product. For S355JR, it is 355MPa when the thickness is inferior or equal to 16mm, and it is reduced to 275MPa for products thicker than 200mm.<\/p>\n See below the table of Yield Strength as a function of the thickness of the product for some structural steels.<\/p>\n Note:<\/p>\n In the SOLIDWORKS Material Database, for materials with material properties that vary with thickness, the values are intentionally set to the most conservative value.<\/p>\n For instance, for material S335JR, the Yield Strength is intentionally set to the conservative value of 275 MPa (see the table above).<\/p>\n The Application Data<\/strong> tab of the Material<\/strong> dialog box explicitly tells the sources of the material properties, and whether some properties depend on thickness, form and processing.<\/p>\n <\/p>\n Please consult the applicable standard or your material supplier (whichever is most relevant) for the most appropriate values of Yield Strength and Tensile Strength to use in your simulations.<\/p>\n By Nicole Phillips<\/p>\n One piece that is often missed when upgrading SOLIDWORKS PDM with Web2 or installing Web2 for the first time is the Application Pool settings.\u00a0 More specifically the \u2018Identity\u2019 setting in the Application Pool.\u00a0 But default this is set as the NetworkService Build-in account and it is also reset when upgrading SOLIDWORKS Web2.\u00a0 \u00a0If it worked before the upgrade with no issue but after the upgrade, there are weird issues.\u00a0 Maybe you are seeing a spinning wheel and nothing is happening.\u00a0 Or previews are not showing as they did before.\u00a0 More than likely it is the Identity in the Application Pool that was reset.<\/p>\n The SOLIDWORKS PDM Web2 application on Internet Information Services (IIS) will use the SOLIDWORKS PDM client Application Program Interface (API) to access file vault information.\u00a0 For the API to be able to access the file vault, the Web2 application pool must run under a Windows\u00ae user profile with sufficient access to the local registry and application data folder. The client API also requires that this profile also have COM component permissions. For example, the API needs access to cached card images, installed add-ins, and file format plugins etc.<\/p>\n When you log in to Windows with a user profile on the IIS server and access the local file vault view, the local application data folders and HKEY_CURRENT_USER registry entries for the vault are created under that profile.\u00a0 This allows the Windows user profile to work in the vault.\u00a0 The user must also have local administrative permissions in order for the Web2 application to function.<\/p>\n To change it, do the following:<\/p>\n <\/p>\n For more information about how to install Web2, see the SOLIDWORKS PDM installation guide at:<\/p>\n http:\/\/www.solidworks.com\/sw\/support\/Administration_guides\/servicepacks.html<\/a><\/p>\n <\/p>\n That\u2019s it for this month. Thanks for reading this edition of SOLIDWORKS Support News.<\/p>\n <\/p>\n![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Yield-Strength-1.jpg\")
<\/p>\n\n
\nExamples:
\nhttp:\/\/www.b2bmetal.eu\/en\/pages\/index\/index\/id\/147\/<\/a>
\nhttps:\/\/britishsteel.co.uk\/media\/40850\/section-s355-jr.pdf<\/a><\/li>\n<\/ul>\n![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Material-300x224.jpg\")
<\/p>\n<\/h2>\n
Are you installing or upgrading SOLIDWORKS PDM Web2?<\/h2>\n
![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Application-Pool-300x119.jpg\")
<\/p>\n![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Identity-1-300x194.jpg\")
<\/p>\n\n
![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Change-Identity-300x193.jpg\")
<\/p>\nNoteworthy Solutions from the SOLIDWORKS Knowledge Base<\/h2>\n
![\"icon](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Screen-capture3.png\")
When creating smart dimensions from the edge of a cosmetic thread to the model edge and from the hole edge to the same model edge in a drawing, why do I see different dimensions?<\/b>
\nFor more information, see Solution Id: S-075758<\/a>.<\/p>\n![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/SOLIDWORKS-Electrical-Icon.png\"){kind=icon}
How can I import configuration settings for a SOLIDWORKS\u00ae Electrical 2018 with SOLIDWORKS PDM integration into SOLIDWORKS Electrical 2019?<\/b>
\nFor more information, see Solution Id: S-075748<\/a>.<\/p>\n![\"Icon](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Screen-capture1.png\")
Can I use the SOLIDWORKS\u00ae PDM convert task to convert a sheet metal flat pattern to the DXF\/DWG file format?<\/b>
\nTo see how to use the Inventor view, follow the steps in Solution Id: S-075797<\/a>.<\/p>\n![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Screen-capture4.png\")
Is there a SolidPractice available on the topic of \u201cBolt Connectors Technical Definition, Tips and Tricks\u201d?
\n<\/b>For additional information, check out solution Id: S-076242<\/a>.<\/p>\n![\"\"](\"https:\/\/blogs.solidworks.com\/tech\/wp-content\/uploads\/sites\/4\/Flow-Simulation-icon.png\"){kind=icon}
In SOLIDWORKS\u00ae Flow Simulation, how do I define and use a refrigerant real gas?<\/b>
\nFor more information, see Solution Id: S-075716<\/a>.<\/p>\n
\n